Fire Alarm Permit Requirements in West Jordan, Utah

Planning a fire alarm installation in West Jordan? Whether you're installing a new system in a commercial building or upgrading an existing system, understanding the permit requirements, plan review process, and certification standards is essential for code compliance and safety.

This guide covers everything contractors and property owners need to know about fire alarm permits in West Jordan, Utah—including when permits are required, the peer review process, contractor licensing, and inspections.

Quick Answer: Do You Need a Permit?

Yes. Fire alarm system installations in West Jordan require permits. West Jordan City has adopted the 2021 International Fire Code and all appendices, and permits are required for work performed under these codes. Fire alarms are life-safety systems subject to strict code requirements, inspections, and certification standards.

When Are Permits Required for Fire Alarms?

Permits are required for the following fire alarm work in West Jordan:

• Fire alarm and detection system installations - All new commercial and residential systems
• System modifications - Adding devices, zones, or coverage areas
• Panel replacements or upgrades - Replacing fire alarm control panels (FACP)
• Related equipment - Fire pumps, fuel tanks, jockey pumps, and controllers
• System removal from service - Decommissioning existing systems
• Tenant improvement projects - Fire alarm modifications as part of build-outs

What Is the Peer Review Process?

West Jordan uses a third-party peer review system for fire alarm plans:

How It Works

• The West Jordan Fire Marshal's Office has approved design professionals who conduct third-party plan reviews
• These companies/individuals cannot review plans developed by their own firm
• Other companies not on the approved list may be used only with prior Fire Marshal approval
• Submit plans to the peer review company of your choice
• When review and written comments are completed, submit at least two hard-copy wet stamped and sealed plan sets

Small Projects

Installation or relocation of less than 5 alarm/notification appliances may have different review requirements. Contact the Fire Marshal's Office for specific guidance.

What Are the Certification Requirements?

Utah has specific certification requirements for fire alarm work administered by the State Fire Marshal's Office:

Utah State Fire Marshal Certification Levels

Utah Certification	NICET Equivalent	Scope of Work
Basic Fire Alarm Technician	NICET Level I	Basic testing under direct supervision
Fire Alarm Technician	NICET Level II	Testing and maintenance up to 4-story buildings
Master Fire Alarm Technician	NICET Level III/IV	All buildings including voice evacuation and smoke control

Design Requirements

Fire alarm system layouts must be prepared by a person certified by NICET at Level III or IV.

Do You Need a Contractor License?

Yes. In addition to State Fire Marshal technician certification, contractors need proper licensing from the Division of Professional Licensing (DOPL):

• Fire Suppression Systems Contractor (S370) - Specialty contractor classification
• Low Voltage Technician License - For certain system components
• General Liability Insurance - Minimum $100,000 per incident, $300,000 total
• 25-hour Pre-licensure Course - Required for specialty contractor licenses

For complete licensing requirements, see our Utah Low Voltage License Guide.

How Do You Apply for a Fire Alarm Permit?

Step 1: Complete Peer Review

Submit plans to an approved third-party reviewer:

• Choose from West Jordan Fire Marshal's approved reviewers list
• Obtain written comments and approval
• Get plans stamped and sealed

Step 2: Prepare Documentation

Gather required documents:

• Two hard-copy wet stamped and sealed plan sets
• Fire alarm system drawings
• Equipment specifications and cut sheets
• Sequence of operation narrative
• Battery and voltage drop calculations
• Device placement floor plans

Step 3: Submit Application

Submit through West Jordan's permit system:

• Online: West Jordan Public Portal
• In Person: West Jordan Permit Center, 8000 S. Redwood Rd., West Jordan, UT 84088
• Phone: (801) 569-5050
• Hours: Monday - Friday, 8 a.m. - 5 p.m. (closed holidays)

Step 4: Inspections

Schedule required inspections at various stages:

• Rough-in inspection - Before walls are closed, verify device placement and wiring
• Final inspection - System testing with inspector present
• Acceptance testing - Complete functional test of all devices and sequences

What Are the Annual Inspection Requirements?

Fire alarm systems in West Jordan require ongoing compliance:

• Annual inspection required - Per NFPA 72 and 2021 International Fire Code
• System tagging - Fire alarm systems must be inspected and tagged annually
• Accessibility - The fire alarm panel must be readily accessible
• Certified technicians only - Inspections must be performed by State Fire Marshal certified technicians

What About Residential vs Commercial Projects?

Residential Fire Alarms

For single-family and multi-family residential in West Jordan:

• Smoke alarms required in each bedroom, wired in series with all other smoke alarms
• Smoke/CO combination alarms required in hallways leading to bedrooms
• Interconnection required - All alarms must be wired in series
• Permits typically required for monitored fire alarm systems

Commercial Fire Alarms

Commercial projects have extensive requirements:

• System design by NICET Level III/IV certified professional
• Third-party peer review required
• Occupancy-specific requirements based on 2021 IFC
• Fire sprinkler integration and monitoring
• Voice evacuation systems for certain occupancies
• ADA-compliant notification appliances

What Codes Apply to Fire Alarms in West Jordan?

Fire alarm installations must comply with:

• 2021 International Fire Code (IFC) - Adopted by West Jordan with all appendices
• NFPA 72 - National Fire Alarm and Signaling Code
• Utah Administrative Rule R710-4 - Building Fire Safety
• Utah Administrative Rule R710-11 - Fire Alarm System Inspecting and Testing
• NFPA 70 (NEC) - National Electrical Code for wiring methods
• ADA - Americans with Disabilities Act for notification appliances

Pro Tips from Experienced Contractors

• Start peer review early - Third-party review adds time to the permit process, so plan accordingly
• Get NICET certified - Utah accepts NICET certifications in lieu of state exams
• Coordinate with sprinkler contractor - Fire alarm and sprinkler systems often integrate
• Document everything - Maintain detailed records for future service and inspections
• Plan for annual compliance - Inform clients about ongoing inspection and tagging requirements
• Keep current on codes - West Jordan uses 2021 IFC with Utah amendments
• Ensure panel accessibility - Fire alarm panels must remain readily accessible

Contact Information

West Jordan Building & Safety

• Address: 8000 S. Redwood Rd., West Jordan, UT 84088
• Phone: (801) 569-5050
• Website: West Jordan Building & Safety

West Jordan Fire Department

• Phone: (801) 260-7300
• Website: West Jordan Fire Permits

Utah State Fire Marshal

• Phone: (801) 256-2390
• Website: Utah State Fire Marshal - Fire Alarm Systems

Stay Ahead of Permit Activity

Want to know when fire alarm projects hit permits in West Jordan before they reach bid boards?

LVN Signal monitors permit activity across Utah and alerts you to opportunities the moment they're filed.

→ Explore LVN Signal

Related Permit Guides for West Jordan

• Security Camera Permits in West Jordan