Structured Cabling Permit Requirements in Summit County, Ohio

Quick Answer: Low-voltage structured cabling installations in Summit County, Ohio are generally exempt from permits when operating under 50 volts. Permits may be required for electrical modifications, fire-rated penetrations, or as part of new construction. Requirements vary across municipalities including Akron.

When Is a Structured Cabling Permit Required?

Summit County municipalities typically require permits for structured cabling in these situations:

• Installation of new electrical circuits for network equipment
• Penetrations through fire-rated walls or floors
• Conduit installations in commercial buildings
• Work included in new construction building permits
• Outdoor aerial or underground cable runs

Critical Jurisdiction Note

Important: Summit County contains multiple municipalities including Akron, Cuyahoga Falls, Stow, and Hudson. Each has its own building department. Akron projects may require dual submission. Verify jurisdiction using the Summit County Fiscal Office property search.

Typically Exempt Work

Most low-voltage structured cabling is exempt from permits:

• Category 5e/6/6A ethernet cable installation
• Fiber optic cable runs
• Coaxial cable for CATV/CCTV
• Telephone and voice cabling
• Patch panel and rack installations
• Cable tray installation in existing spaces
• Wireless access point cabling

Ohio Contractor Licensing Requirements

Ohio has favorable regulations for low-voltage contractors:

Low-Voltage Exemption

Under Ohio law, low-voltage work (under 50 volts) is exempt from electrical licensing. This covers virtually all structured cabling:

• Network and telecommunications cabling
• Fiber optic installations
• Audio/visual cabling
• Security system cabling

When Electrical License Is Required

The Ohio Construction Industry Licensing Board (OCILB) requires licensing for:

• Installing 120V circuits for equipment power
• Working on electrical panels
• Any work over 50 volts

Industry Certifications

While not legally required, these certifications demonstrate competency:

• BICSI RCDD - Registered Communications Distribution Designer
• BICSI Installer Certifications - Copper and Fiber
• Manufacturer Certifications - CommScope, Panduit, Corning, Belden
• OSHA 10/30 - Safety certifications

Permit Application Process

Step 1: Verify Jurisdiction and Requirements

Determine whether permits are needed based on project scope and municipality.

Step 2: Contact Appropriate Building Department

• Unincorporated areas: Summit County Building Standards
• Akron: City of Akron Building Division
• Other municipalities: Local building department

Step 3: Prepare Documentation (If Required)

For projects requiring permits:

• Permit application form
• Floor plans showing cable pathways
• Riser diagrams for multi-floor installations
• Fire stopping specifications
• Equipment room layouts

Step 4: Inspections

If permits are required, schedule inspections with 48-hour advance notice.

Permit Fees and Timeline

Service	Fee Range	Timeline
Low-Voltage Only (typically exempt)	No permit required	N/A
Electrical Permit (if needed)	$50 - $150	3-7 business days
Fire Stopping Inspection	Often included	48-hour advance notice
Re-inspection Fee	$50+	Per occurrence

Fees vary by municipality. Contact the specific jurisdiction for current rates.

Residential vs. Commercial Requirements

Residential Structured Cabling

Home network installations in Summit County typically include:

• Whole-home ethernet wiring
• Home theater and audio distribution
• Smart home backbone infrastructure
• Home office networking
• Security system cabling

Most residential work is low-voltage and exempt from permits.

Commercial Structured Cabling

Commercial projects have additional considerations:

• Plenum-rated cables: Required in air-handling spaces (CMP/OFNP)
• Fire stopping: Required for all fire-rated penetrations
• Pathway compliance: Per NEC Article 725
• TIA/EIA standards: ANSI/TIA-568 compliance
• Labeling: TIA-606 identification standards
• Testing: Certification documentation for warranty

Fire Code Compliance

Structured cabling must comply with Ohio Fire Code:

• Plenum cables: CMP or OFNP rated in air-handling spaces
• Riser cables: CMR or OFNR for vertical runs between floors
• Fire stopping: Listed fire stop systems for rated penetrations
• Cable support: Per NEC 300.11 requirements

Akron-Specific Information

As the largest city in Summit County:

• Dual submission: Projects may require both City of Akron and Summit County approval
• Building Division: 161 South High Street, Room 110
• Plan review: Approximately 14 business days for commercial
• PDF format: Submit plans in PDF format

Pro Tips from Experienced Contractors

• Know your municipality: Summit County has multiple jurisdictions - always verify requirements
• Akron dual process: Factor time for both city and county approvals
• 48-hour notice: Summit County requires advance inspection notice
• Fire stopping documentation: Photo all fire stop installations for inspection
• Plenum vs. riser: Verify space classification before ordering materials
• Test and document: Provide certification reports for warranty protection
• Label everything: Proper labeling saves time on future changes

Contact Information

Summit County Building Standards
175 South Main Street, Room 201
Akron, OH 44308
Phone: (330) 643-2880
Summit County Building Standards

City of Akron Building Division
161 South High Street, Room 110
Akron, OH 44308
Phone: (330) 375-2140
Akron Building Division

Ohio Construction Industry Licensing Board
Phone: (614) 644-3493
OCILB Website

Stay Ahead of Permit Activity

Want to know when structured cabling projects hit permits in Summit County before they reach bid boards?

LVN Signal monitors permit activity across Ohio and alerts you to opportunities the moment they're filed.

→ Explore LVN Signal

Related Resources

• Akron, Ohio Structured Cabling Permits
• Summit County Security Camera Permits
• Summit County Access Control Permits
• All Ohio Permit Guides